Avaya Cajun P882 User Manual page 388

Chapter 9
Parameter
Primary Server IP
Address
Primary Server Port
Secondary Server IP
Address
9-106
Figure 9-43. LDAP Configuration Dialog Box
2. Refer to Table 9-33 to configure the LDAP Configuration
dialog box parameters.
Table 9-33. LDAP Configuration Dialog Box Parameters
Allows You To...
Enter the IP address of your primary LDAP server for the
access control list domain. This address is used first when
connecting to and downloading access lists from an LDAP
server. The default value of 0.0.0.0 indicates to the client
that there is no primary LDAP server.
Enter the port number of the primary LDAP server for
the access control list domain. The port number is used in
conjunction with the primary server IP address. There are
no special overload values. The default port is 389.
Enter the backup LDAP server IP address for the access
control list domain. This address is used as a backup when
connecting to and downloading access lists from an LDAP
server. If the LDAP client is unsuccessful in connecting to
or downloading access lists from the primary server, the
secondary server IP address is used. If the primary server
IP address has a value of 0.0.0.0, the secondary server IP
address is used. The default value is 0.0.0.0.
Note:
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Setting the IP address of the secondary server to
0.0.0.0 indicates to the LDAP client that there is
no secondary server.
1 of 2