Using the All Module Ports Configuration Window
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1
* Note: You must be in Global Configuration mode to enter the
set port auto-flush commands.
For more information about these commands, see Chapter 21,
"Port," in the Command Reference Guide for the Avaya P550R, P580,
P880, and P882 Multiservice Switches, Version 5.3.1
The All Ports Configuration window allows you to apply the same
parameter settings to all switch ports in a module using a single
command.
To set all switch ports in a module using a single command:
1. Select Configuration from the Modules & Ports group
on the Web Agent window. The Module Information
dialog box opens (Figure 5-1).
2. Select the switch port number listed for that module from the
Switch Ports column. The Switch Ports dialog box opens
(Figure 5-7).
3. Select All Module Switch Ports Configuration. The
Switch Ports Configuration - All Ports dialog box opens
(Figure 5-10).
Configuring Port Parameters
5-35