Chapter 15
Enabling AppleTalk Global Routing
15-4
Editing AppleTalk Static Routes
Deleting an AppleTalk Static Route
Creating an AppleTalk Name-Binding Protocol (NBP) Filter
Editing an AppleTalk NBP Filter
Adding or Deleting Interfaces to an NBP Filter
Creating an AppleTalk Zone Filter
Editing an AppleTalk Zone Filter
Adding or Deleting Interfaces to a Zone Filter
To enable AppleTalk routing globally:
1. Select Global Configuration from the Routing >
AppleTalk > Configuration group on the Web Agent
window. The AppleTalk Routing Global Configuration
dialog box opens (Figure 15-1).
* Note: AppleTalk Routing is disabled by default.
Figure 15-1. AppleTalk Routing Global Configuration Window
2. Select Enable from the AppleTalk Routing pull-down
menu.
3. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1