Avaya Cajun P882 User Manual page 568

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Using the CLI

2. Refer to Table 16-13 for an explanation of the CGMP

Snooping dialog box parameters.

Table 16-13. CGMP Snooping Dialog Box Parameters

Enable State

Select to enable or disable CGMP snooping.

• Join Messages Received - Displays the number of

CGMP join messages received.

• Leave Messages Received - Displays the number

of CGMP leave messages received.

• Unknown Messages Received - Displays the

number of unknown CGMP messages received.

• New Sessions Created - Displays the number of

new multicast sessions created by CGMP snooping.

• New Client Ports Added - Displays the number of

new client ports added to a multicast session.

• Existing Sessions Removed - Displays the

number of existing multicast sessions that have been

removed by CGMP snooping.

• All Sessions Removed - Displays the number of

times that all multicast sessions created by CGMP

snooping were removed.

• New Router Ports Added - Displays the number

of new router ports added by CGMP snooping.

• Existing Router Ports Removed - Displays the

number of router ports that were created by the

CGMP snooper and were removed.

APPLY to save your changes

CANCEL to restore previous settings.

To enable CGMP snooping using the CLI, enter the following

command from Configure mode:

<configure># set cgmp enable

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,

and P882 Multiservice Switches, v5.3.1 for details about this command.

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

P550r P580 P880