Chapter 14
CLI Command
Creating IPX SAP Network Filters
Web Agent
Procedure
14-8
e. Select Outbound from the Direction pull-down menu.
f. Select Enable from the Filter/Suppress pull-down menu.
g. Enter 0 in the Hops field. This ensures that there is no
override in the transmission of data on the network.
4. Click APPLY to save your changes, or CANCEL to restore
previous settings.
* Note: This filter ensures that all advertising of any known print
server on Interface Remote will be suppressed.
To create IPX SAP name filters using the CLI, enter the following
command from Configure mode:
# ipx sap-name-filter <precedence> <filter-name>
<service-type> {outbound|inbound|both} {filter|
allow} [<filter-hops>]
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for more details about this
command.
You can create IPX SAP network filters using wither the Web Agent
or the CLI.
To create IPX SAP Network filters using the Web Agent:
1. Select Net Filters from the Routing > IPX > SAP group on
the Web Agent window. The IPX SAP Net Filters dialog
box opens (Figure 14-4).Only the CREATE button is
displayed when no IPX SAP Network Filers are configured.
Figure 14-4. IPX SAP Net Filters Dialog Box
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1