Avaya Cajun P882 User Manual page 327

Creating a
BOOTP/DHCP
Server Entry
Using the CLI
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Figure 9-13. IP BOOTP/DHCP Server Dialog Box
2. Select CREATE. The Add BOOTP/DHCP Server Entry
dialog box opens (Figure 9-14).
Figure 9-14. Add BOOTP/DHCP Server Entry Dialog Box
3. Enter the BOOTP/DHCP server IP address in the IP Address
field.
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
* Note: It is possible to create multiple BOOTP/DHCP Server
Entries if necessary.
To create a BOOTP/DHCP entry using the CLI, enter the following
command in Configure mode:
<configure># ip boot-dhcp server
<ip-address>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
Configuring IP Routing
9-45