Chapter 4
Table 4-3. Spanning Tree Information Configuration Field Options
Parameter
Time Since
Topology
Change
(hh:mm:ss)
4-18
Definition
Number of hours, minutes, and seconds since the last topology change
3. Click APPLY to save your changes, or CANCEL to restore
previous settings.
4. Select a VLAN name from the Bridge column (Figure 4-9)to
set the bridge parameters. The Spanning Tree Bridge
Configuration dialog box opens (Figure 4-10).
Figure 4-8. Spanning Tree Bridge Configuration Dialog Box
5. Refer to Table 4-4 to configure the Spanning Tree Bridge
Configuration parameters:
Table 4-4. Spanning Tree Bridge Configuration Parameters
Parameter
Definition
Mode
Determines whether spanning tree is enabled or
disabled for this bridge.Default is Enabled
Priority
Spanning Tree Protocol Priority level for this bridge.
The Default value is 32768, the parameter range is 0-
65535
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
3 of 3
1 of 2