Setting Up Cbwfq - Avaya Cajun P882 User Manual

Chapter 21

Setting Up CBWFQ

21-42
Table 21-23. Keywords, Arguments, and Options
Keyword, Argument
or Option
<rate>
For information about how the CBQ queue-servicing algorithm
works, see "CBQ" on page 37.
Use the set port queue service cbwfq command to set a port, port
range, or module to use class-based weighted fair queuing (CBWFQ)
queue servicing. The syntax of the command is:
Avaya(configure)# set port queue service {{<mod-num> | <mod-
swport-range>} [..., {<mod-num> | <mod-swport-range>}] | all-
ports} cbwfq queue <queue> bit-rate <rate> normal-burst
<normal-burst> [exceed {drop | max-burst <max-burst> [weight
<weight>]}]
Table 21-24. Keywords, Arguments, and Options
Keyword, Argument
or Option
<mod-num>
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Definition
The maximum bits per second that you
want to assign to the queue.
If the switch is operating in Fabric mode 1,
the rate can range from 220 Kbps to 1.5
Gbps.
If the switch is operating in Fabric mode 2,
the rate can range from 270 Kbps to 1.5
Gbps
Entering a rate of 0 disables the queue.
Definition
The slot number of a module. If you
specify <mod-num>, all ports on the
module are set to use CBQ.
2 of 2
1 of 4