Avaya Cajun P882 User Manual page 437

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
3. Refer to Table 11-9 for an explanation of the OSPF Link
State Database Search dialog box parameters:
Table 11-9. OSPF Link State Database Search Dialog Box
Parameter Allows you to...
Area ID Searches the database for the 32-bit identifier of the area
from which a LSA was received.
Type Searches the database for all entries that match one of
the following types:
• Router Links - These packets describe the states of
• Network Links - These packets are generated by
• Summary Network - These summaries are
• Summary AS border - This describes links to
• AS external - These packets are generated by
• Multicast group - These packets are generated by
• NSSA external - These packets are generated by
Router ID Searches the database for all entries that this router
originated.
4. If your search produces results, the detailed information
displays in the OSPF Link State Database dialog box
(Figure 11-13).
Configuring the OSPF Routing Protocol
Parameters
the router's links to the area and are only flooded
within a particular area.
Designated Routers and describe the set of routers
attached to a particular network.
generated by Area Border Routers and describe
inter-area routes to various networks. They can
also be used for aggregating routes.
Autonomous System Border Routers and are
generated by Area Border Routers.
Autonomous System Border Routers and describe
routes to destination external to the Autonomous
system. They are flooded everywhere except stub
areas.
multicast groups.
Area Border Routers and describe routes within the
NSSA (Not-So-Stubby-Area).
11-29