Cli Command - Avaya Cajun P882 User Manual

CLI Command

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Table 13-3. IPX RIP Interface Statistical Parameters continued
Parameter
Network Number
Triggered Updates
Sent
Non-triggered
Updates Sent
Updates Received
Requests Received
Bad Packets Received
To interpret IPX RIP interface statistics using the CLI, enter the
following command from Interface mode:
(config-if <interface name>)# show ipx interface
[<intf-name>]
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
Configuring the IPX RIP Protocol
Definition
The network number of the IPX network
associated with the interface.
The number of triggered updates sent from the
RIP interface.
The number of non-triggered updates sent from
the RIP interface.
The number of updates received. Updates may be
received periodically even if no changes have
occurred.
The number of requests received on the RIP
interface.
The number of bad packets received on the RIP
interface.
13-9