Chapter 4
Table 4-3. Spanning Tree Information Configuration Field Options
Parameter
IEEE 802.1D
4-16
Figure 4-7. Spanning Tree Information Dialog Box
2. Select the type of spanning tree you want to implement from
the Configuration field pull-down menu.
Refer to Table 4-3 for a definition of the Configuration field
parameters:
Definition
Single IEEE 802.1D-compliant spanning tree for the entire bridge.
In 802.1D spanning tree mode, there is one root Bridge for the whole
network, regardless of whether the switches support VLANs or not.
Only one active data path is supported for all VLANs from any point in
the network to any other point
Note: When the spanning tree mode is set to IEEE 802.1D, Bridge
Protocol Data Units (BPDUs) are sent out ports in Clear (non-tagged)
format even if the port has a tagged format (3Com, IEEE 802.1Q or
Cisco ISL) defined.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
1 of 3