Configuring Redundant Hardware
Redundant Switch Controllers and Elements
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Replacing an Element
Configuring Supervisor Module Redundant Ethernet Console
IP Addresses
Synchronizing the Active and Standby CPUs
The Avaya Multiservice switches provide a redundant backplane to
ensure that should a Supervisor module, Switch Controller, or fabric
element fail, it will continue to forward data properly. The
redundant components are available as separate options.
Controllers and Elements are located at the rear of the switches.
When the redundant controller and element are installed, the
backplane consists of the following parts (Figure 7-1or Figure 7-2):
One Primary Controller
One Redundant Controller
Six Active elements
One Redundant element
Figure 7-1. Layout of the Redundant Backplane for P550R/P580
Configuring Redundancy Options
Chassis
7-3