Using the CLI
Deleting Static Multicast Sessions
Using the Web
Agent
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
To create a new static multicast session using the CLI, enter the
following command from Configure mode:
<configure># set intelligent-multicast
static-session <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
You can delete static multicast sessions using either the Web Agent
or the CLI.
To delete a static multicast session using the Web Agent:
1. Select Static Sessions from L2 > Intelligent Multicast
group on the Web Agent window. The Static Multicast
Sessions dialog box opens (Figure 16-9).
2. Refer to Table 16-7 for an explanation of the Static
Multicast Sessions dialog box parameters.
Figure 16-9. Static Multicast Sessions Dialog Box
Managing Intelligent Multicasting
16-17