Adding Ports To The Hunt Group - Avaya Cajun P882 User Manual

Chapter 4

Adding Ports to the Hunt Group

Using the Web
Agent
4-36
5. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Once you have created and named a Hunt Group, you can add as
many additional ports as needed to the Hunt Group. The next two
Hunt Group configuration steps, adding physical ports, and switch
ports to the Hunt Group, can be done using the Web Agent or the
CLI.
To add ports to a hunt group using the Web Agent:
1. Select Configuration from the Modules and Ports folder
on the Web Agent window. The Module Information
window opens (Figure 4-20).
Figure 4-20. Module Information Window
2. Select a port number from the Ports column. The Physical
Port Configuration window opens (Figure 4-21).
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1