Configuring Event Notification - Avaya Cajun P882 User Manual

Configuring Event Notification

Using the Web
Agent
Using the CLI
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about these
commands.
You can Configure event notification using either the Web Agent or
the CLI.
To Configure Event Notification from the Web Agent:
1. Select General Events from the Events group on the Web
Agent window. The General Event Manager dialog box
opens (Figure 17-3).
2. Click the check box in the ID Field of the event you wish to
log.
3. Click on the checkbox next to the log in the Action column
for every event you wish to log.
4. Click APPLY to configure or CANCEL to ignore.
To configure Event Notification using the CLI, enter the following
command from Configuration mode:
<configure># logging history <event>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about these
commands.
Monitoring the Avaya Multiservice Switch
17-19