Chapter 12
12-10
Figure 12-6. IPX Static Routes Dialog Box
2. To create a new IPX Static Route Click on CREATE
* Note: Only the create button is shown if no IPX Static Routes
are configured.
3. The Add IPX Static Route dialog box opens (see Figure 12-
7).
Figure 12-7. Add IPX Static Route Dialog Box
4. Refer to Table 12-4 to configure the IPX Static Route
parameters.
Table 12-4. IPX Static Route Parameters
Parameter
Allows you to...
Network
Enter the IPX network number that you want to
assign to the IPX static route.
Next-Hop Node
Enter the MAC address for the next destination to
which the packet is routed. Format of the value to
enter is aa:bb:cc:dd:ee:ff.
Interface
View the IPX Interface associated with the next hop.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1