Chapter 3
CLI Command
Displaying Cooling System Statistics
Web Agent
Procedure
3-16
* Note: You will see 1400W of available power displayed in the
Total System Power field if you have three power
supplies installed. The switch only uses power from two
of the three power supplies. The third power supply is a
redundant power supply and is used only if one of the
other power supplies fails.
To display your switch's power system statistics using the CLI, enter
the following command from the User mode:
> show system power
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
You can display the statistics for your switch's cooling system from
either the Web Agent or CLI.
To display your switch's cooling system statistics using the Web
Agent:
1. Select Cooling System from the System > Configuration
group on the Web Agent window. The Cooling System
dialog box opens with the status of your switch's cooling
system (see Figure 3-9 for the P550R/P580 switch, or
Figure 3-10 for the P880 and P882 switch).
Figure 3-9. P550R/P580 Cooling System Status Window
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1