Creating Static Client Ports - Avaya Cajun P882 User Manual

Chapter 16
Parameter
Select
VLAN
MAC Address
IP Address
Static Client Ports
Using the CLI

Creating Static Client Ports

Using the Web
Agent
16-18
Table 16-7. Static Multicast Sessions Dialog Box
Definition
Select the static multicast session to be deleted.
Displays the VLAN on which the static multicast session
exists.
Displays the MAC address of the static multicast session.
Displays the IP address associated with the static
multicast session, if available.
Displays the number of static client ports associated with
the static multicast session and opens the Static Multicast
Session Client Ports dialog box.
3. Select the checkbox next to the static multicast session that
you want to delete.
4. Click DELETE to remove the static multicast session.
To delete a static multicast session using the CLI, enter the following
command from Configure mode:
<configure># clear intelligent-multicast
static-session <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
You can create and add static client ports using either the Web
Agent or the CLI.
* Note: You can only add static client ports to static sessions on
VLANs that the port is bound to or on sessions created
for All VLANs.
To create a static client port using the Web Agent:
1. Select Static Sessions from L2 > Intelligent Multicast
group on the Web Agent window. The Static Multicast
Sessions dialog box opens (Figure 16-9).
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1