Avaya Cajun P882 User Manual page 461

Parameter
Type
Network
Node
Socket
Next-Hop Node
Interface
Hops
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Table 12-5. IPX Static Service Dialog Box Parameters
Allows you to...
Enter the service type (in hex) that identifies the type of IPX
static service the server provides.
Well-known service types include:
• Unknown (0)
• Print Queue (3)
• File Server (4)
• Job Server (5)
• Print Server (7)
• Archive Server (9)
• Remote Bridge Server (24)
• Advertising Print Server (47)
Enter the IPX Static Service network number (in Hex).
Enter the IPX Static Service node address (in hex).
The format of the node value is aa:bb:cc:dd:ee:ff.
Enter the number (in hex) associated with a running process on
the end node (for example, RIP, NLSP).
Enter the MAC address of the next destination through which
the service is reached.
The format of the node value is aa:bb:cc:dd:ee:ff.
Enter the interface that corresponds to the next-hop node.
Enter the number of routers (hops) that the packet must pass
through before reaching the network number associated with
the service.
4. Click APPLY to save your changes, or CANCEL to restore
previous settings.
5. To view or modify IPX Static Services, select Static Services
from Routing > IPX > Configuration group on the Web
Agent window. The configured IPX Static Services dialog box
opens (Figure 12-11)
Configuring IPX Routing
2 of 2
12-15