Chapter 3
CLI Command
SNMP
Table 1. MIB, MIB Object, and OID for Remotely Resetting the Switch
MIB
ProminetMib.txt,
version 5.2
3-18
Figure 3-11. System Reset Page Window
2.
Select Save to save your Running Configuration
(Running-Config to the startup configuration
(Startup-Config before performing a system reset.
* Note: If you do not save your Running-Config to
Startup-Config before you reset the switch, you
will lose all of the modifications you made.
3.
Click YES to reset the switch, or NO to cancel the operation.
To reset your switch using the CLI, enter the following command
from Priv mode:
# reset
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
To reset the switch remotely by using SNMP, use the MIB object
that is listed in Table 1.
* Note: You must have administrative privilege to perform
this task.
MIB Object
promChassisSystemReset
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
OID
1.3.6.1.4.1.2167.3.1.3