Avaya Cajun P882 User Manual page 412

Chapter 11
11-4
2. Refer to Table 11-1 to configure the OSPF Global
Configuration dialog box parameters:
Table 11-1. OSPF Global Configuration Dialog Box Parameters
Parameter Allows you to...
OSPF Select to enable or disable OSPF globally on your switch.
Router ID Specify the Router ID on the switch. The router ID is a
32-bit number assigned to each router running OSPF.
This number uniquely identifies the router within an
Autonomous System. If 0.0.0.0 is used, the router uses
the IP address of an interface.
AS Border Enable or disable the switch to be an Autonomous
Router System Border Router (ASBR).
SPF Hold Specify the minimum number of seconds between SPF
Time (shortest path first) runs.
SPF Suspend Specify the number of nodes to process SPF runs before
suspending.
Auto- Enable or disable the function of automating the
Creation of creation of virtual circuits based on network topology.
Virtual Links This feature is Avaya proprietary and only auto creates
virtual links on the config. notes.
Maximum Configure the maximum number of paths used when
Number of running OSPF.
Paths
Local Ext Specify whether imported local routes are advertised in
Type OSPF with type 1 (internal) or type 2 (external) metrics.
RIP Ext Type Specify whether imported RIP routes are advertised in
OSPF with type 1 (internal) or type 2 (external) metrics.
Static Ext Specify whether imported high preference static routes
Type are advertised in OSPF with type 1 (internal) or type 2
(external) metrics.
Static Low Specify whether imported low preference static routes
Ext Type are advertised in OSPF with type 1 (internal) or type 2
(external) metrics.
3. Click APPLY to save changes, or CANCEL to restore
previous settings.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1