New Software Features; 5.3.1 Software Features; V5.3 Software Features - Avaya Cajun P882 User Manual

Chapter 1

New Software Features

5.3.1 Software Features

v5.3 Software Features

1-22
Two CoS priority queues for 50-Series modules and eight
CoS priority queues for 80-Series modules provide flexible
queue management algorithms to meet application
requirements.
Configurable queue depth for each prioritized packet queues.
Configurable priority threshold.
Configurable service ratio tunes queue priority.
Version 5.3.1 provides support for the following new software
features:
Ability to change the TCP port numbers for HTTP requests
and Telnet requests. For information on how to change the
TCP port numbers, see
Telnet." in Chapter 2, "Initialize and Setup."
The Auto Flush feature. This feature has been added to the
switch on a per-port basis. For information on how to
configure Auto Flush, see
in Chapter 5, "Configuring Port Parameters."
The following new software features are implemented in Version
5.3:
Custom Access Types.
This feature allows you to create custom access types in
addition to the standard READ_ONLY, READ_WRITE,
and ADMINISTRATOR access types. For information
about creating and managing custom access types, see
"Configuring Custom Access Types"
CLI support for the following Quality of Service (QoS)
features:
Queue servicing by means of class-based queuing (CBQ).
—
Queue servicing by means of class-based weighted fair
—
queuing (CBWFQ).
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
"Changing the TCP Ports for HTTP and
"Enabling the Auto Flush
on page 2-12.
Feature"