Chapter 19
Web Agent
Procedure
19-14
limited. This is because packets are dropped during the
bandwidth limiting process. Since both source and
mirror packets are subject to drop, and because packets
are dropped at random, if packets are dropped from
either the source or the mirror traffic (or both), there is
no guarantee that the mirror traffic will match the
source traffic.
* Note: Fabric mode 2 port mirroring is not supported for hunt
group ports.
To use the Web Agent to set up port mirroring on a switch in Fabric
mode 2:
1. Expand the Modules & Ports folder.
2. Click Port Mirroring.
The Port Mirroring Information page opens (Figure 19-6).
Table 19-5 provides an explanation of each field on the Web
page.
Figure 19-6. Port Mirroring Information Web Page
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1