Avaya Cajun P882 User Manual page 355

Parameter
Neighbor Querier Timeout
(sec)
Group Join Requests
Received
Group Leave Requests
Received
Group Reports Received
Query Messages Received
Query Messages
Transmitted
Unknown Messages
Received
Number of Current
Groups
Displaying IGMP
Interface
Statistics Using
the CLI
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Table 9-15. IGMP Interface Statistics Dialog Box Parameters
Defines the...
Amount of time (in seconds) remaining before this
interface assumes the role of designated querier. This
timer is reset to the value entered for the Neighbor
Querier Timeout Interval each time an IGMP query is
received from a neighbor with a lower IP address. If no
response is received in the allowed time, the switch will
become the designated querier on this interface.
Applicable only if IGMP V2 is used.
Number of new groups on this interface.
Number of leave requests received on this interface.
Number of reports received on this interface in response
to a group membership query. Hosts respond to a Query
by generating Host Membership Reports reporting each
host group to which they belong on the network interface
from which the Query was received.
Number of query messages received from other multicast
routers.
Number of query messages sent by a multicast router.
These messages are sent to discover which host groups
have members on their attached local networks. Queries
are addressed to the all-hosts group (address 224.0.0.1),
and carry an IP time-to-live of 1.
IGMP messages received with an unsupported type.
Number of groups on each interface for which there are
entries in the Group Membership Table.
To display the IGMP Interface Statistics window using the CLI, enter
the following command from configuration mode:
(configure)# show ip igmp statistics
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
Configuring IP Routing
2 of 2
9-73