Chapter 9
Displaying the IGMP Group Membership Table
Table 9-16. IGMP Group Membership Table Dialog Box Parameters
Parameter
Group Member Interface
Group Address
Group Created On
9-74
The multicast group table provides information on interfaces that
are members of an IGMP group and contains an expiry time for the
entry, IP address of the group, and the group reporter address.
To display the multicast group table using the Web Agent:
1. Select Group Membership Table from the Routing >
IGMP group on the Web Agent window. The IGMP Group
Membership Table dialog box opens.
Figure 9-28. IGMP Group Membership Table Dialog Box
2. To modify the IGMP Group Membership Table, perform
one of the following steps:
Select the entry and click Delete Entry to delete one or
—
more entries.
Click Flush Table to clear the entire table.
—
Click REFRESH to receive the most up-to-date
—
information on the entries in the table.
3. Refer to Table 9-16 for an definition of the IGMP Group
Membership Table dialog box parameters:
Defines the...
Interface that is connected to a member of an IGMP
group.
Group address that has members on this interface.
Time at which the group was created on the router.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1