Displaying Ipx Service Table Statistics - Avaya Cajun P882 User Manual

Parameter
Select
Name
Type
Network
Node
Socket
Interface
Source
TTL
Hops
Next-Hop
MAC Address

Displaying IPX Service Table Statistics

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
2. Refer to Table 12-11 to review each field in the IPX Services
table:
Table 12-11. IPX Service Table Parameters
Defines the...
Parameter selected.
Name of the service in question. For example, FS_ENG01.
(Use SLIST (NetWare 3.x™) or NLIST (NetWare 4.x™) to list
your current server names and types from your NetWare
server.)
Service type that identifies the type of service the server
provides. Well known service types include:
• Unknown (0)
• Print Queue (3)
• File Server (4)
• Job Server (5)
• Print Server (7)
• Archive Server (9)
• Remote Bridge Server (24)
• Advertising Print Server (47)
Network number of the IPX service.
Node address of the service.
Number associated with a running process on the end node
(for example, RIP, NLSP).
Interface associated with the next hop to the service.
Method by which the service was learned. For example, SAP
or static.
Number of seconds before the service expires.
Number of routers (hops) that the packet must pass through
before reaching the network number associated with the
service.
MAC address of the next destination through which the
service is reached.
To display the IPX service table statistics:
1. Select Service Table Statistics from the Routing > IPX >
Display Web Agent window. The IPX Service Table Statistics
dialog box opens (Figure 12-16).
Configuring IPX Routing
12-25