Avaya Cajun P882 User Manual page 311

Second Example
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
10. Leave the TCP/UDP Source Port field alone:
a Min. of 0 (HTTP).
—
a Max. of 65536 (HTTP).
—
11. Select TCP Established. A check mark displays in the check
box.
12. Click CREATE to save your changes, or CANCEL to restore
previous settings.
Each time any end user attempts to access the web server specified
by the destination TCP/UDP ports, all web requests are filtered.
Filtering Traffic Between 10.1.1.0 and 10.1.2.0 Subnets. It is possible
to filter traffic to either a specific address or to an entire subnet. In
this example, all traffic between the two subnets is filtered:
This example also assumes that the network is a Class C sub
network (255.255.255.0).
To filter traffic between both subnets, you must create two access
rules.
To create the Extended Access list and rules:
1. Select Access Lists from the Routing > IP > Configuration
group on the web Agent window. The IP Access List dialog
box opens (Figure 9-6).
2. Select Create Extended. The IP Extended Access Rule
Creation dialog box opens (Figure 9-8).
3. Enter a number between 100 and 199 (or Alphanumeric)
(extended ACL) in the Access List Name field to identify
your new access control list.
4. Enter a number in the Access Rule Index file to identify the
access rule.
5. Select Deny/Filter from the Access Type field pull-down
menu.
6. Enter the source address (10.1.2.0) and the source address
wildcard (0.0.0.255), respectively, in the Source Address
field.
7. Enter the destination address (10.1.1.0) and the destination
address wildcard (0.0.0.255), respectively, in the Dest
Address field.
Configuring IP Routing
9-29