Avaya Cajun P882 User Manual page 574

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Upper Warning

Lower Warning

Low Shutdown

Using the CLI

2. Refer to Table 17-3 to set the threshold values:

Table 17-3. Temperature Threshold Values

Value in degrees Celsius that causes the switch to send a

trap to the network management station and triggers a

shutdown when it is passed. The default value is 100

degrees Celsius.

Value in degrees Celsius that causes the switch to send a

high temperature threshold warning when it is passed. The

default value is 85 degrees Celsius.

Value that in degrees Celsius that when passed causes the

switch to send a warning that the temperature is

approaching the low temperature threshold. By default,

this value is 5 degrees Celsius.

Indicates the low shutdown temperature for a switch to

reset the warning and high thresholds. This value prevents

the switch from sending traps continually if the

temperature is hovering around the threshold value. The

default value is 0 degrees Celsius.

To check the temperature status using the CLI, enter the following

command from Configuration mode:

<configure># show temperature

To Configure temperature threshold values using the CLI, enter the

following command from Configuration) mode:

<configure># set temperature <options (backplane

sensor, CPU-sensor, probe, supervisor-slot)>

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,

and P882 Multiservice Switches, v5.3.1 for details about these

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

P550r P580 P880