Network Error Detection And Recovery; Overview - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Table 2. MIB, MIB Object, and OID for GBIC Identification

ProminetMib.txt,

Network Error Detection and Recovery

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1

To use the CLI to view the type of GBICs that are connected to the

modules in your switch:

1. Enter either the User, Privileged, or Global Configuration

* Note: For information on how to enter these modes,

see "Accessing/Exiting the Command Modes" in

Chapter 1, "Overview," of Command Reference

Guide for the Avaya P550R, P580, P880, and P882

Multiservice Switches, Version 5.3.1.

2. Enter the following command:

show port physical [{<mod-num> | <mod-swport-range>}

[...,{<mod-num> | <mod-swport-range>}]]

The type of GBIC that is connected to each port is displayed in

the Connector field.

To use SNMP to view the type of GBICs that are connected to the

modules, use the MIB objects that are listed in Table 2. These MIB

objects are located in ProminetMib.txt, version 5.2.

promPortConnector

The Network Error Detection and Recovery (NEDR) feature

monitors Ethernet CRC errors on Ethernet data ports and compares

the rate of errors that occurs to the threshold values that you set.

This feature helps you find the source of the errors and take

corrective action if necessary.

This feature monitors the Ethernet CRC errors on Ethernet data

ports. At a pre-determined interval, the feature compares the

number of errors to the threshold settings. By enabling this feature,

you can log errors in the event log and shutdown the port that is

receiving CRC error packets. Currently you can enable this feature

Configuring Port Parameters

1.3.6.1.4.1.2167.3.6.1.1.1.7

P550r P580 P880