Chapter 17
Checking Temperature Status and Configuring Thresholds
17-2
Table 17-1. Front Panel LED Display Interpretation continued
Module...
LED...
10/100
Port
Modules
You can check the temperature status and configure temperature
thresholds by using either the Web Agent or the CLI.
* Note: The temperature thresholds have been raised for the
backplane and slot 1. In high temperature climates, the
switch was frequently reaching the default temperature
thresholds. Table 17-2 lists the new default temperature
thresholds. All temperatures are measured in degrees
Celsius.
Table 17-2. New Default Temperature Thresholds
Temperature
Threshold
Upper Warning
Lower Warning
Low Warning
Shutdown Temperature
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Behavior...
Indication...
Solid green,
Port enabled and sending and
with orange
receiving traffic Traffic
flash
indicated by yellow flashes.
Flashing green
Port disabled with link up.
Flashing
Hardware failure.
orange
Off
No link.
Slot 1
Backplane
60°
60°
5°
5°
0°
0°
65°
65°
CPU
Sensor
85°
5°
0°
100°