Variable Definitions; Configuring Local Time Zone - Avaya 5900 Series Quick Start Configuration

2. Enter Privileged EXEC mode:
enable
3. Enter the following command to configure RTC:
clock set {hh:mm:ss <1–31> [<1–31> {[MONTH <2005–2099>] [MONTH <1–
31> <2005–2099>]} [LINE]}

Variable definitions

Use the definitions in the following table to use the clock set command.
Variable
<LINE>
<hh:mm:ss>
<1–31>
<MONTH>
<2005–2099>

Configuring local time zone

Configure the time zone to use an internal system clock to maintain accurate time. The time zone
data does not include daylight saving time changes. You must configure daylight saving time.
About this task
Use this procedure to configure the local time zone.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. Enter the following command to enable SNTP:
sntp enable
3. Enter the following command to configure the time zone:
clock time-zone <zone> <hours> [minutes]
4. Enter the following command to configure daylight saving time:
October 2015
Value
Specify a string in the format of mmddyyyyhhmmss
that defines the current local time.
Specify the current local time in the hh:mm:ss
format.
RTC date
RTC month
RTC year
Quick Start Configuration for Avaya ERS 5900 Series
Comments on this document? infodev@avaya.com
Configuring local time zone
37