Globally
Enabling IGMP
Using the CLI
Modifying IGMP
Interfaces Using
the Web Agent
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
3. Select Global Configuration from the Routing > IGMP
group on the Web Agent window. The IGMP Global
Configuration dialog box opens (Figure 9-17).
Figure 9-17. IGMP Global Configuration Dialog Box
4. Select Enable from the IGMP field pull-down menu to
enable IGMP.
5. Select Enable from the MTRACE field pull-down menu to
enable MTRACE processing.
6. Click APPLY to save your changes, or CANCEL to restore
previous settings.
To globally enable IGMP using the CLI, enter the following
command from Configure mode:
<configure># set router igmp
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
To modify IGMP interfaces from the Web Agent:
1. Select Interfaces from the Routing > IGMP group on the
Web Agent window. The IGMP Interfaces dialog box opens
(Figure 9-18)
*Note: You must first enable "multicast protocol"on an
interface before you can configure IGMP. Refer to
"Displaying Existing IP Interfaces" earlier in this
chapter for more information on how to select a
multicast protocol.
Configuring IP Routing
9-51