Configuring Switch Port Parameters - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Configuring Switch Port Parameters

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1

4. Refer to "Configuring Physical Port Parameters on Gigabit

Ports" and "Configuring Physical Port Parameters on Fast

Ethernet Ports" earlier in this chapter to configure the port

5. Click APPLY to save your changes, or Restore to restore

previous settings.

This section contains the following procedures:

Configuring Switch Port Parameters

Configuring Fast Start Mode

Enabling the Auto Flush Feature

Using the All Module Ports Configuration Window

Viewing Switch Port Parameters

You can configure how each switch port performs its switching

functions (for example, VLAN parameters, hunt group assignments,

trunk mode, and frame tag scheme) through the switch port

You can configure switch port parameters using either the Web

Agent or the CLI.

Before changing the VLAN that a port is assigned to, you must

remove the port from the hunt group that the port is assigned to. Do

not attempt to change the VLAN and remove the port from the hunt

group simultaneously. If you attempt to change the VLAN that the

port is assigned to and remove the port from the hunt group

simultaneously, the switch assigns all ports in the hunt group to the

To configure switch port parameters using the Web Agent:

1. Select Configuration from the Modules & Ports group on

the Web Agent window. The Module Information dialog

box opens (Figure 5-1).

Configuring Port Parameters

P550r P580 P880