Avaya Cajun P882 User Manual page 513

Using the CLI
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Figure 15-14. Add AppleTalk NBP Filter Dialog Box
3. Refer to Table 15-3 to configure the Add AppleTalk NBP
filter dialog box.
Table 15-3. AppleTalk NBP Filter Parameters
Parameter Definition
Access List Enter the access list number to be associated with the
NBP filter. Valid values are 600-631.
Name Enter the name of the NBP name object to be filtered.
Type Select the type of filtering. The options include:
• Deny
• Permit
Interface Select the interface(s) to apply this filter to.
4. Click CREATE to add your new static route, or CANCEL to
restore previous settings.
To create an NBP filter using the CLI, enter the following command
from Interface mode:
(config-if <interface-name>:)# appletalk access-
list <access-list-number> <permit | deny> nbp
<string>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Configuring AppleTalk Routing
15-17