Using the CLI
Creating OSPF Areas
Using the Web
Agent
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
To globally configure OSPF using the CLI, enter the following
command in Configure mode:
> (configure)# router ospf
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3 for details about this command.
You can create OSPF areas using either the Web Agent or the CLI.
To create OSPF areas using the Web Agent:
1. Select Areas from the Routing > IP > OSPF group on the
Web Agent window. The OSPF Areas dialog box opens
(Figure 11-2).
* Note: The Area ID 0.0.0.0 is a backbone area and
always exists in an OSPF configuration.
Figure 11-2. OSPF Areas Dialog Box
2. Click CREATE. The Add OSPF Area dialog box opens
(Figure 11-3).
Configuring the OSPF Routing Protocol
11-5