Avaya Cajun P882 User Manual page 556

Chapter 16
16-24
Table 16-9. LGMP Server Configuration Dialog Box Parameters
Parameter
Enable State
Proxy Mode
Server ID Priority
Router Report
Time
Robustness
Variable
LGMP Servers
LGMP Message
Reception
Statistics
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Definition
Select to enable or disable LGMP server
configuration. The default value is Disabled.
Select to enable or disable Proxy mode. Proxy
mode allows the server to send LGMP router
report and leave messages on behalf of neighbor
routers on the same VLAN.
The priority of the LGMP server on this switch.
The server ID priority and the IP address
associated with the VLAN determine whether the
LGMP server wins LGMP distribution election.
The lower the number the more likely it will win
the election. The valid range is 0 to 255. The
default value is 128.
The time interval (in seconds) between router
reports sent by the LGMP server in distributor
state. The valid range is 10 to 10,000. The default
value is 125 seconds.
The scalar value used by non-distributor LGMP
servers when timing out the LGMP server in the
distributor state. The valid range is 2 to 10. The
default value is 2.
Displays the number of LGMP servers and opens
the LGMP Server Display per VLAN dialog box.
Note: Only VLANs that have an active IGMP
interface can be LGMP servers.
• Router Report - Displays the number of
LGMP router report messages received.
• Invalid - Displays the number of LGMP
messages received with an invalid payload.
1 of 2