Mtest:data - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

23
:MTESt Commands

:MTESt:DATA

Command Syntax
:MTESt:DATA <mask>
<mask> ::= binary block data in IEEE 488.2 # format.
The :MTESt:DATA command loads a mask from binary block data.
Query Syntax
:MTESt:DATA?
The :MTESt:DATA? query returns a mask in binary block data format. The
format for the data transmission is the # format defined in the IEEE 488.2
specification.
Return Format
<mask><NL>
<mask> ::= binary block data in IEEE 488.2 # format
See Also
•
•
522
(see page 1208)
":SAVE:MASK[:STARt]"
":RECall:MASK[:STARt]"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 633
on page 617