Polycom RMX 1500 Administrator's Manual page 39

Table 1-5 New Profile - Advanced Parameters (Continued)
Field/Option Description
Auto Terminate When selected (default), the conference automatically
ends when the termination conditions are met:
Before First Joins — No participant has connected to
a conference during the n minutes after it started.
Default idle time is 10 minutes.
At the End - After Last Quits — All the participants
have disconnected from the conference and the
conference is idle (empty) for the predefined time
period. Default idle time is 1 minute.
At the End - When Last Participant Remains —
Only one participant is still connected to the
conference for the predefined time period (excluding
the recording link which is not considered a participant
when this option is selected). This option should be
selected when defining a Profile that will be used for
Gateway Calls and you want to ensure that the call is
automatically terminated when only one participant is
connected. Default idle time is 1 minute.
Note: The selection of this option is automatically
cleared and disabled when the Operator Conference
option is selected. The Operator conference cannot
automatically end unless it is terminated by the RMX
User.
Auto Redialing The Auto Redialing option instructs the RMX to
automatically redial IP and SIP participants that have
been abnormally disconnected from the conference.
•
•
•
•
Polycom RMX 1500/2000/4000 Administrator's Guide
Auto Redialing is disabled by default.
Auto Redialing can be enabled or disabled during
an ongoing conference using the Conference
Properties – Advanced dialog box.
The RMX will not redial an endpoint that has been
disconnected from the conference by the
participant.
The RMX will not redial an endpoint that has been
disconnected or deleted from the conference by an
operator or administrator.
1-13