Polycom RMX 1500 Administrator's Manual page 47

11 Define the video display mode and layout using the following
parameters:
Table 1-2 Profile Properties - Video Settings
Field/Option
Presentation
Mode
Lecture View
Switching
Send Content to
Legacy
Endpoints
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
Select this option to activate the Presentation Mode.
In this mode, when the current speaker speaks for a
predefined time (30 seconds), the conference changes
to Lecture Mode. When another participant starts
talking, the Presentation Mode is cancelled and the
conference returns to the previous video layout.
Select this option to enable automatic switching of
participants on the Lecturer's screen when Lecture
Mode is enabled for the conference.
The automatic switching is enabled when the number
of participants exceeds the number of video windows
displayed on the Lecturer's screen.
Note: Lecture Mode is enabled in the Conference
Properties – Participants tab. For more information,
see "Lecture Mode" on page 2-94.
When enabled (default), Content can be sent to H.323/
SIP/ISDN endpoints that do not support H.239 Content
(legacy endpoints) over the video (people) channel.
For more details, see Chapter 2, "Sending Content to
Legacy Endpoints" on page 2-38.
Notes:
• This option is enabled in MPM+ and MPMx Card
Configuration Modes only.
•
When enabled, additional video resources are
allocated to the conference:
•
In MPM+ mode, an additional SD video
resource is allocated.
•
In MPMx mode, an additional HD video
resource is allocated.
• This option is valid when sending Content as a
separate stream is enabled by the system flag:
ENABLE_H239 set to YES.
• Select this option when Avaya IP Softphone will be
connecting to the conference.
1-21