Polycom RMX 1500 Administrator's Manual page 49

Table 1-2 Profile Properties - Video Settings (Continued)
Field/Option Description
Telepresence Select the Telepresence Mode from the drop-down
Mode menu:
•
•
•
Notes:
•
Telepresence The Telepresence Layout Mode drop- down menu,
Layout Mode enables VNOC operators and Polycom Multi Layout
Applications to retrieve Telepresence Layout Mode
information from the RMX.
The following modes can be selected:
•
•
•
Polycom RMX 1500/2000/4000 Administrator's Guide
Off - Normal conference video is sent by the RMX.
Auto (Default) - If any ITP (Immersive
Telepresence) endpoints are detected, ITP
features are applied to the conference video for all
participants.
When Auto is selected, the ITP features are
dynamic. If all ITP endpoints disconnect from the
conference, normal conference video is resumed
for all participants. ITP features are resumed for all
participants should an ITP endpoint re-connects to
the conference.
On - ITP features are applied to the conference
video for all participants regardless of whether
there are ITP endpoints connected or not.
This field is enabled only if the RMX system is
licensed for Telepresence Mode.
Manual
Continuous presence - Room Continuous
Presence (Default)
Room Switch - Voice Activated Room Switching
1-23