Show Gvrp Configuration - Cisco 300 Series Cli Manual

GARP VLAN Registration Protocol (GVRP) Commands
78-21075-01 Command Line Interface Reference Guide
Syntax
[interface-id]
clear gvrp statistics
Parameters
Interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Default Configuration
All GVRP statistics are cleared.
Command Mode
Privileged EXEC mode
Example
The following example clears all GVRP statistical information on gi5.
switchxxxxxx#
clear gvrp statistics
41.6

show gvrp configuration

Use the show gvrp configuration EXEC mode command to display GVRP
configuration information, including timer values, whether GVRP and dynamic
VLAN creation are enabled, and which ports are running GVRP.
Syntax
show gvrp configuration
Parameters
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
•
detailed—Displays information for non-present ports in addition to present
ports.
Default Configuration
All GVRP statistics are displayed for all interfaces. If detailed is not used, only
present ports are displayed.
gi5
[interface-id | detailed
]
41
677