Dot1X Re-Authenticate - Cisco 300 Series Cli Manual

802. 1 X Commands
78-21075-01 Command Line Interface Reference Guide
Parameters
seconds
reauth-period
(Range: 300-4294967295)
Default Configuration
3600
Command Mode
Interface Configuration (Ethernet) mode
Example
switchxxxxxx(config)# interface gi1
switchxxxxxx(config-if)# dot1x timeout reauth-period 5000
22.6

dot1x re-authenticate

The dot1x re-authenticate Privileged EXEC mode command manually initiates
re-authentication of all 802.1X-enabled ports or the specified 802.1X-enabled
port.
Syntax
dot1x re-authenticate
Parameters
interface-id—Specifies an Ethernet port ID.
Default Configuration
If no port is specified, command is applied to all ports.
Command Mode
Privileged EXEC mode
—Number of seconds between re-authentication attempts.
[interface-id]
22
323