Virtual Local Area Network (VLAN) Commands
78-21075-01 Command Line Interface Reference Guide
Parameters
N/A
Default Configuration
Ingress filtering is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Example
The following example disables port ingress filtering on gi1.
switchxxxxxx(config)#
switchxxxxxx(config-if)#
switchxxxxxx(config-if)#
32.18 switchport general acceptable-frame-type
The switchport general acceptable-frame-type Interface Configuration mode
command configures the types of packets (tagged/untagged) that are filtered
(discarded) on the interface. Use the no form of this command to return ingress
filtering to the default.
Syntax
switchport general acceptable-frame-type
no switchport general acceptable-frame-type
Parameters
•
tagged-only—Ignore (discard) untagged packets and priority-tagged
packets.
•
untagged-only—Ignore (discard) VLAN-tagged packets (not including
priority-tagged packets)
•
all—Do not discard packets untagged or priority-tagged packets.
interface gi1
switchport mode general
switchport general ingress-filtering disable
{tagged-only | untagged-only | all}
32
507