Service Cpu-Utilization - Cisco 300 Series Cli Manual

5
System Management Commands
Default Usage
N/A
Command Mode
Privileged EXEC mode
User Guidelines
You can use this command to display a pending software reload. To cancel a
pending reload, use the privileged EXEC command with the cancel parameter.
Example
The following example displays that a reboot is scheduled for 00:00 on Saturday,
April-20.
switchxxxxxx# show reload
Reload scheduled for 00:00:00 UTC Sat April 20 (in 3 hours and 12 minutes)
or
Scheduled reload is not configured.
5.8

service cpu-utilization

The service cpu-utilization Global Configuration mode command enables
measuring CPU utilization. Use the no form of this command to restore the default
configuration.
Syntax
service cpu-utilization
no service cpu-utilization
Parameters
N/A
Default Configuration
Measuring CPU utilization is disabled.
100 78-21075-01 Command Line Interface Reference Guide