Show Qos - Cisco 300 Series Cli Manual

49
796
•
ports-not-trusted mode: For packets that are classified to the QoS action
trust.
•
ports-trusted mode: For packets that are not classified by to any QoS action
or classified to the QoS action trust.
Example
The following example sets cos as the trust mode for QoS on the device.
switchxxxxxx(config)# qos advanced-mode trust cos
49.3

show qos

Use the show qos EXEC mode command to display the QoS information for the
device. The trust mode is displayed for the QoS basic mode.
Syntax
show qos
Parameters
N/A
Default Configuration
Disabled Command Mode
Command Mode
EXEC mode
User Guidelines
Trust mode is displayed if QoS is enabled in basic mode.
Examples
Example 1 - The following example displays QoS attributes when QoS is enabled
in basic mode and the advanced mode is supported.
switchxxxxxx#
show qos
Quality of Service (QoS) Commands
78-21075-01 Command Line Interface Reference Guide