Ip Https Certificate; Show Ip Http - Cisco 300 Series Cli Manual

13
226
switchxxxxxx(config)# ip http secure-server
13.5

ip https certificate

Use the ip https certificate Global Configuration mode command to configure the
active certificate for HTTPS. Use the no form of this command to restore the
default configuration.
Syntax
number
ip https certificate
no ip https certificate
Parameters
number—Specifies the certificate number. (Range: 1–2)
Default Configuration
The default certificate number is 1.
Command Mode
Global Configuration mode
User Guidelines
First, use crypto certificate generate
Then use this command to specify which is the active certificate.
Example
The following example configures the active certificate for HTTPS.
switchxxxxxx(config)#
13.6

show ip http

The show ip http EXEC mode command displays the HTTP server configuration.
to generate one or two HTTPS certificates.
ip https certificate
78-21075-01 Command Line Interface Reference Guide
Web Server Commands
2