Show Platform Configuration - Cisco Catalyst 3560-X Command Reference Manual

show platform configuration

show platform configuration
Note
Syntax Description
Command Modes
Command History
Usage Guidelines
Catalyst 3750-X and 3560-X Switch Command Reference
C-4
Downloaded from www.Manualslib.com
Use the show platform configuration privileged EXEC command to display platform-dependent
configuration-manager related information.
show platform configuration {config-output | default | running | startup} [ | {begin | exclude |
include} expression]
This command is not supported on switches running the LAN base feature set.
config-output Display the output of the last auto-configuration application.
default Display whether or not the system is running the default configuration.
running Display a snapshot of the backed-up running configuration on the local
switch.
startup Display a snapshot of the backed-up startup configuration on the local switch.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Privileged EXEC
Release Modification
12.2(53)SE2 This command was introduced.
You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
manuals search engine
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
OL-21522-02