Show Dot1X Statistics - Cisco 300 Series Cli Manual

802. 1 X Commands
78-21075-01 Command Line Interface Reference Guide
Example
The following example displays 802.1X user with supplicant username Bob.
switchxxxxxx# show dot1x users username Bob
Port Username Session
Time
--------- ------------------------------
gi1 Bob 1d 09:07:38

22.14 show dot1x statistics

Use the show dot1x statistics Privileged EXEC mode command to display 802.1X
statistics for the specified port.
Syntax
show dot1x statistics interface
Parameters
interface-id—Specifies an Ethernet port ID.
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example displays 802.1X statistics for gi1.
switchxxxxxx#
show dot1x statistics interface gi1
EapolFramesRx: 11
EapolFramesTx: 12
EapolStartFramesRx: 1
EapolLogoffFramesRx: 1
EapolRespIdFramesRx: 3
Auth MAC
Method Address
-----------
Remote 0008.3b79.8787
interface-id
22
VLAN
----
3
333