Ip Domain Timeout - Cisco 300 Series Cli Manual

DNS Client Commands
78-21075-01 Command Line Interface Reference Guide
Syntax
number
ip domain retry
no ip domain retry
Parameters
number—Number of times to retry sending a DNS query to the DNS server. The
range is from 0 to 16.
Default Configuration
The default value is 2.
Command Mode
Global Configuration mode
User Guidelines
The number argument specifies how many times the DNS query will be sent to a
DNS server until the switch decides that the DNS server does not exist.
Example
The following example shows how to configure the device to send out 10 DNS
queries before giving up:
ip domain retry 10
86

ip domain timeout

Use the ip domain timeout command in Global Configuration mode to specify the
amount of time to wait for a response to a DNS query.
Use the no form of this command to return to the default behavior.
Syntax
seconds
ip domain timeout
no ip domain timeout
8
157