39
656
Default Configuration
2
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
You can execute the command before the VLAN is created.
Example
switchxxxxxx(config)# interface vlan 1
switchxxxxxx(config-if)# ipv6 mld robustness 3
39.4
ipv6 mld snooping vlan mrouter
Use the ipv6 mld snooping vlan mrouter Global Configuration mode command to
enable automatic learning of Multicast router ports. Use the no form of this
command to remove the configuration.
Syntax
ipv6 mld snooping vlan
no ipv6 mld snooping vlan
Parameters
•
vlan-id—Specifies the VLAN.
•
pim-dvmrp—Learn Multicast router port by PIM, DVMRP and MLD
messages.
Default Configuration
Learning pim-dvmrp is enabled.
Command Mode
Global Configuration mode
vlan-id
mrouter learn
vlan-id
mrouter learn
78-21075-01 Command Line Interface Reference Guide
IPv6 MLD Snooping Commands
pim-dvmrp
pim-dvmrp